Contact Form
Please fill all fields marked with *
Metalworking Fluids // Metal Cutting Fluids
- PROCLEAN SYS Improves rancidity control by removing biofilm, dirt, grit, insoluble soaps and oils.
- Low foaming
- Removes insoluble soaps from dirty central systems in hard water areas
- Removes chip deposits and tramp oil from central systems and machines
- Protect machines and parts from rusting during cleaning.
Description
PROCLEAN SYS is recommended for cleaning individual machine and central system reservoirs, metalworking fluid lines, premix tanks, machines and parts and as an additive to improve a fluids sump life.
Application
SUMP CLEANER:
After draining: Drain used metalworking fluid and charge system with 2% PROCLEAN SYS.
Circulate for at least 2-4 hours through all lines and machine tools (does not cause rust), drain, rinse and recharge with a fresh PROLEAN SYS product.
With fluid in use: After production stops, add 4 Litres PROCLEAN SYS concentrate to each 200 litres of dirty fluid (2%) in the machine reservoir or central system. Circulate the mixture for four hours or longer through all lines and machine tools. Drain, rinse and recharge with a fresh coolant.
Recommended dilutions
PROCLEAN SYS is to be mixed with water for use. Always add concentrate to water.
System cleaning 2%- 4% (1:50-1:25) Concentration varies depending on the type of machining operation, the water hardness, and required finish.
The survey form is available with Callington representative.
Ordering Info
| Code | Packaging |
|---|---|
| 20 litres | |
| 200 litres |