Description

Description

Calltonton S-Weld Brite Wash is an acidic, biodegradable detergent designed for surface cleaning for stainless steel & carbon steel after fabrication. It is also suitable for in-situ cleaning of architectural stainless steel surfaces. S-Weld Brite Wash removes surface dust, soil, rust, water stains, iron and organic contamination without affecting the surface finish of the stainless steel. It can also be used to remove surface corrosion and staining on handrails and other stainless steel surfaces. It is excellent for cleaning of machined carbon steel parts.

Directions For Use

Directions For Use

1. General Surface Cleaning After Fabrication:  Mix 1 part of S-Weld Brite Wash with 1 part of clean water. Wet surface with a sponge or rag and follow immediately by scrubbing with a stainless steel Scotch Brite type pad. Rinse with clean water once all traces of corrosion are removed.
   
   

2. Corrosion Removal: Where the surface of handrails, stainless steel cladding or process plant and carbon steel equipment shows visible signs of corrosion (rusting).

Application

Application

Hand Wipe Application: Mix 1 part of S-Weld Brite Wash with 1 part of clean water. Wet surface with a sponge or rag and follow immediately by scrubbing with a stainless steel Scotch Brite type pad. Rinse with clean water once all traces of corrosion are removed.

Spray Application: Mix one part of S-Weld Brite Wash with 1 to 2 parts of clean water. Spray onto surface with an acid resistant spray pump. Where appropriate, scrub the surface with a Scotch Brite pad. For hard to use areas, use a high-pressure spray containing a 10% solution of S-Weld Brite Wash. Rinse thoroughly with clean water when all visible traces of corrosion have been removed.

Physical Properties

Physical Properties

Density @ 20 Deg.C: 1.35 

Appearance:               Colour Water White

Refer to the Callington Haven material safety data sheets for further safety information on S-Weld Brite Wash.