Contact Form
Please fill all fields marked with *
Welding & Metal Treatment Products // Aluminium Preparation & Treatment Products
- Restores the original lustre to the metal
- Leaves no residual flim after rinsing, reducing post weld surface prepartion
- Non-flammable, making it workshop safe for application and storage
- Readily rinsible with water, for easy mixing
- Fast acting formulation, reducing cleaning time
- Concentrated cleaner making it very econmical to use on large scale projects
Description
Description
Callington Albright is a powerful acidic detergent designed to quickly remove atmospheric corrosion, road grime and soils from all aluminium surfaces, and some stone and cement building materials. Commonly it is used to deoxidise and brighten transport vans, boat hulls, aluminium sidings and road tankers.
Callington Albright works quickly to restore the original lustre to the metal. Albright is often used to prepare an aluminium surface before welding and to clean off weld scale. Albright can be used to brighten mag wheels.
Albright will also remove soil, years of accumulated fungi, rust and wood stains from fibro, cement, terrazzo tiles and unpolished rock.
Directions For Use
Directions For Use
Apply a diluted solution of Callington Haven's Albright by spray, brush or swab to transport equipment. For equipment that is regularly washed, use Albright diluted 1 part with 7 to 10 parts of water. The exact concentration required will naturally depend on the degree of surface contamination.
For the removal of medium to heavy surface corrosion, dilute 1 part Albright to 3 parts of water.
Apply an even coat of Albright solution, beginning at the bottom and working up. Agitate the surface with a stiff bristle broom where stubborn stains persist. After 5 to 10 minutes rinse with water. Wear gloves and eye protection when handling this product, avoid splashes as the product contains acid.
APPLICATION
Application
Apply an even coat of Albright by using a non-atomizing spray, sponge or rag to the surface being treated.
Where applicable, the application should begin on the bottom and work up.
Allow 3 to 15 minutes, for extreme cases of corrosion you will require a second application.
Agitate the surface with a stiff bristle broom where stubborn stains persist.
WASH DOWN:
After the corrosion or oxidation has been attacked sufficiently. Flush off with a hose or agitate the surface briskly with a frim
Physical Properties
Physical properties
Specific Gravity: 1.14 - 1.16
pH (as supplied): < 1
Water Solubility: Miscible
State: Liquid
Appearance: Clear, colourless, strongly acidic liquid with a fragrant odour.
Allow 3 to 15 minutes. Extreme cases of corrosion require a second application.